Wahu Aqua Tramp How To

We love Summer and we love the water. There is nothing better than getting outside in the sunshine (With lots of sunscreen on, of course!). Our Aqua Tramp is our largest product and it can be a little confusing to figure out. Suitable for the kids, Mum and Dad, anyone really. We have put together some easy step by step instructions on how to inflate, deflate and store.

 

Inflating the Aqua Tramp

 

Step 1: Take the Aqua Tramp out of the packaging and lay it out flat. (Please ensure the surface where you are laying the tramp out is free of debris.)

 

Step 2: When inflating the Aqua Tramp, you have 2 options. If you are somewhere that you have access to power, use our AC Electric Pump: Hi Volume. If you are outdoors and have no power point near, but you have your car, use out DC Electric Air Pump: Vehicle. Once you have connected your Wahu pump, use the “Barrel Connection” and make sure the connection is on “Inflate mode”

 

Step 3: Go along the Aqua Tramp and look for inflate point number 1. This will be clearly marked with the number 1.

 

Step 4: Connect the tube attached to the middle of the inflate point.

 

Step 5: Place the pump nozzle into the tube and proceed to inflate. Do not over inflate.

 

Step 6: Once inflated, quickly remove the tube and place the “Stopper” (Attached to the tube) and turn to seal.

 

Step 7: Go along the Aqua Tramp and look for inflate point number 2. This will be clearly marked with a number 2.

 

Step 8: Connect the tube attached to the middle of the inflate point.

 

Step 9: Place the pump nozzle into the tube and proceed to inflate. Do not over inflate.

 

Step 10: Once inflated, quickly remove the tube and place the “Stopper” (Attached to the tube) and turn to seal.

 

 

Once Finished with Use

 

Step 1: Rinse the Aqua Tramp with clean water

 

Step 2: Before deflating the Aqua Tramp, move it to a dry, cool area to let it dry for a minimum of 1 hour.

 

 

 

To pack down

 

Step 1: Once the Aqua Tramp is completely dry, remove the tube in inflation point number 1.

 

Step 2: Place your Wahu pump on “Deflate” mode and connect the barrel connection.

 

Step 3: Connect the attached tube into the inflate point and proceed to deflate the Aqua tramp until there is no air left

 

Step 4: Repeat step 3 for inflation point number 2.

 

Step 5: Once the Aqua Tramp is completely free of air, fold up tightly and store in a plastic, lid tight container and store in a cool, dry area.

 

 

 


Leave a comment

Comments have to be approved before showing up